Toro DT34 Manuale Utente Scaricare il pdf (Pagina 5)

Nozzle Trajectory Adjustment Procedure _______________________________________

Note: The nozzle trajectory is factory pre-set at 25 degrees.

1. Insert the multi-purpose tool (P/N 995-83) into the slot provided in the top of the cap. Pull the riser assembly up, then grasp the

assembly to hold it in the popped-up position.

2. Remove the cap retaining screw and cap.

3. Using a 5/8" nut driver (P/N 995-99), turn the nozzle/housing assembly left to select 15° trajectory as shown in Figure 4. Turn the

nozzle/housing assembly right to select 25° trajectory as shown in Figure 5.

4. Install the cap making sure the top the nozzle housing is correctly nested in the cap.

5. Install the cap retaining screw.

6 Activate the sprinkler to check the spray trajectory.

Figure 5

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Toro DT34 Manuale Utente Pagina 5